D. Nail Goku Carving Gel 20 Amber Color 5g
$8.00
Carving gel for 3D art.
In addition to 3D, you can create 3D parts that were previously made with acrylic powder to your satisfaction without worrying about the hardening time. Operability is neither too hard nor too soft
[Precautions when using Goku Carving Gel]
1.The optimal thickness is around 3mm.
Since pigments with good coloring are used, there is a risk that the inside will not harden if it is thick.
2.For works that will be stored after creation, please create them using clear chips as a base.
Make sure to use a clear chip as a base so that when you put it in the light, the LED light will pass through from the back.
D.nail’s clear tip can be removed from the tip after the carving gel has hardened.
3. Due to the risk of allergies, we do not recommend using it with bare hands, using it on areas with thin skin such as the back of the hand, or operating uncured carving gel for a long time.
It can be operated hygienically by using the separately sold “Kiwami Skin Protection Sheet”.
*If you feel any abnormality, please stop using it immediately.
*If you have allergies, please understand the characteristics of carving gel before purchasing.
LED approx. 1-2 minutes
Curing wavelength: 385-415nm
Recommended wattage: 36W (LED)
Stirring: not required
